Simplex 4099 Series Addressable Manual Station

SIMPLEX 4099 Series Addressable Manual Station

The SIMPLEX 4099 Series addressable manual station allows building occupants to initiate a fire alarm signal from a clearly identified location. It integrates an individual addressable module, or IAM, that continuously monitors the station’s status and communicates status changes to the control panel through IDNet or MAPNET II.

Each station uses one individual address and receives power and communication through a single pair of wires, simplifying its integration into compatible SIMPLEX addressable systems.

Key features

• IDNet or MAPNET II addressable communication.
• One individual address per station.
• Visible LED indicator that flashes during communication and remains steadily illuminated when the station is activated.
• Extended handle provides a clear visual indication of activation.
• Key reset helps reduce unauthorized tampering.
• Operation meets ADA accessibility requirements.
• Single-action and double-action configurations.
• Screw terminals for incoming and outgoing wiring.
• Surface, semi-flush, or flush mounting with compatible boxes and adapters.
• Compact housing designed to minimize dust infiltration.
• UL 38 listed; other listings and approvals depend on the selected model and configuration.

Available models

• 4099-9004: single-action operation.
• 4099-9004SP: single-action operation with Spanish labeling.
• 4099-9005: double-action break-glass operation.
• 4099-9005SP: double-action break-glass operation with Spanish labeling.
• 4099-9006: double-action push-and-pull operation.
• 4099-9006SP: double-action push-and-pull operation with Spanish labeling.
• 4099-9021: single-action model with an easy-activation handle.

UL, ULC, FM, and CSFM listings or approvals vary by model, language, and configuration. The applicable part number and approvals should be verified during product selection.

Compatibility

The series is compatible with SIMPLEX 4007ES, 4008, 4010, 4010ES, 4100ES, 4100U, 4020, 4100, and 4120 fire alarm control panels equipped with IDNet or MAPNET II communication. It also supports 2120 Series communication device transponders equipped with MAPNET II.

General technical specifications

• Address setting: eight-position DIP switch.
• Supported wiring: 18 to 14 AWG.
• Operating temperature: 32 to 120°F (0 to 49°C).
• Relative humidity: up to 93% at 100°F (38°C).
• Application: indoor use.
• Rating: NEMA 1 when used with the 2975-9178 back box.
• Material: Lexan polycarbonate or equivalent.
• Dimensions: 5 × 3¾ × 1 in. (127 × 95 × 25 mm).
• Color: red housing with raised white lettering and a white handle with raised red lettering.

Recommended applications

The station can be integrated into fire detection and alarm systems for commercial, industrial, and municipal facilities, as well as indoor areas of service stations, provided that the location, control panel, and installation comply with NFPA 72 and applicable local codes.

The data sheet does not identify this station as intrinsically safe, explosion-proof, or approved for hazardous locations. Its use near fuel dispensing or storage areas must therefore be evaluated by a qualified fire protection professional.

Request a quote from WIS to confirm the correct model, labeling, mounting accessories, and compatibility with your SIMPLEX control panel. Specifications, listings, and approvals should be verified before purchase because Johnson Controls states that they are subject to change without notice.